Talk to an Expert Now!
Menu

3 Axis USB Vibration Data Logger

  • Record 3-axis load force acceleration value
  • Real time FFT for frequency analysis
  • Measure dynamic and static acceleration
  • Maximum of 327,600 data recording
  • Option of manual (remote) operation or specific time recording mode
  • Complimentary software for parameter setup, analysis & report generation capabilities
  • Calibration function
  • Green & Red LED signal indication
  • Magnet or screw type mounting pedestal
  • USB interface for data downloading

to detect tilt, shock, vibration and other motion activities

  • Acceleration Range: -16g to +16g
  • Acceleration Resolution: 3.9mg
  • Frequency Range: 0 ~ 60Hz
  • Data Memory: Maximum of 327,600 data storage
  • Sampling Rate: 50 milli-second to 24 hours
  • Power: 3.6V lithium battery; specs: 3.6V lithium battery
  • Power Consumption: Record < 20mA, spare time < 600µA
  • Battery Life: About 2500 hours (stand-by mode), > 60 hours (recording mode)
  • Computer Interface: USB connection
  • Operation Temperature and Humidity: 0°C ~ 45°C; 5% ~ 95%RH
  • Storage Temperature and Humidity: -20°C ~ +60°C; ≤ 85%RH (without battery)
  • Dimensions: 113mm x 54mm x 32.5mm
  • Weight: About 73.5g (without battery)
  • System Requirement: Windows XP, Vista, 7, 8
  • Minimum Hardware Requirement: P4 1.4Ghz or higher CPU, 256MB RAM, graphic card (must support DirectX 9.0c)
  • 1 x Vibration Data Logger with Cap
  • 1 x Mounting Pedestal with Magnets
  • 1 x Logging Software on CD
  • 1 x USB connection cable
  • 1 x 3.6V Lithium Battery
  • 1 x User’s Manual
  • 1 x Standard Factory Packing