P.O.A.
Please call or email of your technical requirements to our sales department for an official quote of this specific product.
The DMS-9200 series Dust monitoring system used to detect the Particulate matter PM2.5 and PM10, TSP, Noise, as well as Meteorological parameters including of Temperature, Humidity, Wind speed, Wind direction, Barometric pressure. Combined with industrial laser sensor technology and unique heating dehumidification compensation device, the influence of ambient temperature and humidity on the detection results of particulate matter is reduced significantly. Software is Cloud based so it will allow the users to access the measurements in real time anywhere.
- Modular designed , easy to set different monitoring factors on demands, suitable for large scale grid distribution points.
- Real-time data displaying and the update time is adjustable.
- Calibration is carried out on site according to the traceable reference standards.
- No need to change the sampling cutter, it can detect the PM10, PM2.5, TSP at the same time.
- The circuit adopts industrial embedded processor, suitable for the harsh outdoor environment with working temperature is -40~70 degree.
- The particulate sampling is controlled by dynamic heating and dehumidification to remove the influence of water mist on measurement data.
- Adopts long-life anti-jamming sampling power system, quiet and efficient; the sampling period is adjusted.
- Adopts the industrial transmission module to ensure the stability and reliability of the data transmission; the system with the two-channel communication to ensure the data continuity.
- It can recognise remote data transmission and read the system status information remotely, as well as the remote control, modify instrument parameters remotely and diagnose faults.
- Large size LED to display the data.
- Various installation modes.
- Optional IP cameras with various parameters to record the video.
- Factory environments
- Research
- Warehouse
- Outdoor applications
| Model | DMS-9200 | |
| Item | Description | Specification |
| Particle Modules
(PM) |
Measurement data | PM2.5, PM10, TSP |
| Measuring range | 0 ~ 10mg/m3 | |
| Resolution | 1ug/m3 | |
| Response time | ≤ 60s | |
| Sampling flow | ≤ 0.001 mg/m3 | |
| Sampling time | Adjustable (Default is 5 minutes) | |
| Monitor method | Continuously, automatically and real-time | |
| Working principle | Light scattering technique | |
| Dehumidification | With the automatic dehumidification function module | |
| Fault alarm | Real-time display the fault alarm | |
| Noise monitor
|
Measuring range: 30 ~ 130dB (A) | |
| Sampling frequency: <1s | ||
| Dynamic analysis range: ≥100dB (A) | ||
| Frequency weighting: A, C, Z | ||
| Time weighting: F, S | ||
| Meteorological parameters
|
Temperature: Measuring range: -40 ~ 70℃
Accuracy: ±0.3℃ @ 20℃ |
|
| Humidity: Measuring range: 0 ~ 100%RH
Accuracy: ±2% (5% ~ 95%RH @ 25℃) |
||
| Wind direction: Measuring range: 0 ~ 360°
Accuracy: ±5° |
||
| Wind speed: Measuring range: 0 ~ 30m/s
Accuracy: ±0.3m/s |
||
| Barometric pressure: Measuring range: 30 ~ 110Kpa
Accuracy: ±2.5pa |
||
System Specification:
| Data efficient transmission rate | ≥ 95% |
| Remote control | Support for remote setting |
| Interface | RS485 / RS232 port, Network port |
| Transmission network | Automatically and real-time upload data, optional 3G/4G/VPN/WIFI |
| Box material | Q235 spray, Stainless box (Optional) |
| Scaffold material | Q235 |
| Scaffold height | Standard height is 4.5m, Flange connection (1m fixed underground, 2*1.5m+1*0.5m) |
| Lightning arrester | Length 1m, Q235 Galvanized material |
| Working environment | Temperature: -30~50℃
Humidity: 10%RH~90%RH Pressure: 65~108Kpa |
| Protection grade | IP65 |
| Power supply | AC220V/50Hz/Solar power (Optional) |
